Clean the inside of the engine effectively with flushing oil

After indulging ourselves with greasy food, there are also days when we want to detox the body by eating healthy food so that we can feel fresher, right? Do you know that our car's engine should also be cleaned from the inside too!? The longer we use the car, the more and more soot and dirt will accumulate in the parts of the engine which can result in worsening performance and higher fuel consumption.

Although changing engine oil regularly can help maintain engine cleanliness to a certain extent, it may not be enough to remove the sludge, soot and dirt accumulated over time that still remain in various parts, such as around the oil pan, pistons, rings and cylinder heads, etc. Especially in high mileage cars, the more black smoke and soot they emit, the more dirty the engine is. Regular cleaning of the engine with high quality Flushing Oil from PTT Lubricants is another way to maintain your engine’s cleanliness and good performance for a long time.

What is a 'Flushing Oil'? In the process of changing the oil, flushing oils can be used to wash away any dirt that remains inside the engine. After draining the old engine oil completely, fill the flushing oil up to the normal amount that the engine oil is regularly filled or to the full level (Full, F, MAX) of the dipstick, then start the engine and keep it running for about 15 minutes without stepping on the accelerator since it can cause severe wear. After 15 minutes, drain the flushing oil completely, then add new engine oil and replace the filter. This will clean the inside of the engine thoroughly, bringing your car back to its full performance again.

Let's take a look at 3 advantages of cleaning the inside of the engine thoroughly with flushing oil from PTT Lubricants.

1. Clean engine thoroughly, bringing it back to its full capability

Flushing oils will help wash away soft sludge, soot, and dirt, restore cleanliness of the internal parts of the engine so it can work at the full capability again. Cleaning the engine will also help keep the fuel consumption at normal rate as well.

2. Reduce wear, extend service life

When solid contaminants such as dust, soot and metal debris accumulate in the engine, they will increase the risk of wear from surface abrasion. Therefore, using flushing oils maximizes the flushing of these solid particles from the engine to reduce the potential wear, keep the engine in good condition and extend its service life.

3. Maximize engine oil’s efficiency, make it worth all the pennies

When the inside of the engine is cleaned with flushing oil, the engine can utilize the new engine oil at its full efficiency since the sludge and dirt residues have already been washed out of the engine. Therefore, they cannot contaminate our newly changed engine oil.

And here are the 3 advantages of cleaning the inside of the engine thoroughly with flushing oil. For anyone who has never cleaned the engine, we recommend that you take your car to a service center or your local auto repair shop. And don't forget to look for Flushing Oil from PTT Lubricants as well. With excellent cleaning power, it will clean your engine and help protect your car from deterioration so you can drive safely with confidence!